home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Aminet 1 (Walnut Creek)
/
Aminet - June 1993 [Walnut Creek].iso
/
aminet
/
hard
/
drivr
/
supra25.lha
/
Docs
/
MountList
< prev
next >
Wrap
Text File
|
1991-05-13
|
2KB
|
62 lines
/*
This is for accessing the Supra 2400zi modem at the DOS level.
If the software you are using requires a DOS level interface,
copy the mdm-handler file from the SupraModem disk to your l:
directory. Then add the MDM: entry provided below to the
MountList in your devs: directory.
You may specify the desired baud rate,databits,parity,stopbits
when you open the device...
mdm:set/1200/8/N/1
This would open the mdm: device at 1200 baud, 8 bits, no parity,
and 1 stop bit.
Allowable baud rates : 2400, 1200, 600, 300
Allowable databits : 8, 7
Allowable parity : N,E,O (None,Even,Odd)
Allowable stopbits : 1,2
You may specify whether you want the handler to echo the characters
back or not. The default will echo. To turn off the echo...
mdm:NOECHO
You may also specify whether you wish to pass everything through
without interpretation (RAW mode). To do this...
mdm:RAW
You may mix and match between the baudrate setup,noecho and raw
when opening the device...
mdm:set/2400/8/e/1/NOECHO/RAW
Note: If you attempt to startup a cli on the modem, set the modem
up using a terminal program by issuing the commands:
ATS0=1 (to answer the phone)
ATQ1 (to turn off result codes)
ATE (to turn off echo)
You may then do
newcli mdm:
to startup a cli on the modem.
*/
MDM: Handler = L:Mdm-Handler
Stacksize = 4000
Priority = 5
#
NOTE: Some people have had problems making the mdm-handler work. We are
trying to find the solution, but at this time do not have one. 5/10/91